Nexpon
  • Home
  • About Us
  • Products
    • HydroCoat
    • HydroFlex
    • HydroFiber
    • HydroSeal
    • NexCrete Hardener
    • SolarCoat
    • UltraCoat
  • Project Gallery
  • Contact
  • Home
  • About Us
  • Products
    • HydroCoat
    • HydroFlex
    • HydroFiber
    • HydroSeal
    • NexCrete Hardener
    • SolarCoat
    • UltraCoat
  • Project Gallery
  • Contact
HydroFiber
Picture

HydroFiber - Waterproofing Solutions

Product Features
  • Non toxic and Eco-friendly technology
  • Low VOC & Formaldehyde Free​
  • Extreme weather resistant and UV resistant
  • Water vapour permeable 
  • Anti-algal and fungal protection
  • Form a homogeneous seamless elastomeric waterproofing membrane
  • Trafficable to accommodate medium to heavy vehicle traffic on the coated surface
  • Fully cured film is tough, good wear resistance & durability
  • Superb adhesive strength on various surface
Product Description
HydroFiber is a single component high performance water-based membrane system waterproofing coating and based on co-polymer with integral micro-fiber reinforcement. It is specially formulated to provide enhanced tensile strength of the coatings to forms a flexible, tough and durable heavy duty waterproofing  membrane protective layer. ​Its membrane system is designed suitable for use in repair or maintenance works and renovation projects for waterproofing purpose. HydroFiber also suitable for use in hot and tropical climates. 
Application
  • Surface Preparation: All surface must be clean and free from dust, oil and all forms of contamination.
  • Application Method: Can be applied by roller, brush and airless spray.
  • Primer: Nexpon Primer
  • 1st Layer: HydroFiber
  • 2nd Layer: HydroFiber (For better performance)
  • Usage Rates: Approximately 0.5 kg/sqm/layer
Uses
  • All types of substrate or surface, concrete block,  asphaltic and other proper clean surface.
  • RC flat roof and floor slabs
  • Metal or zinc roofs
  • Terraces, balconies and services yards.
  • Based on requirement, it can used with a separate fiber reinforcement fabric for additional strength and toughness.
Technical Data
Product ~ HydroFiber
Packaging ~ 4 kg/pail & 18 kg/pail
Colour ~ White/RAL standard color (Customized)
Specific Gravity ~ 1.3 kg/L to 1.4 kg/L
Surface Dry ~ Approx ½ hour (200μ, 25°C - 30°C)
Adhesion ~ > 1.0 N/mm2
Elongation ~ Up to 120% 
Tensile Strength ~ Up to 2.5 Mpa
​Crack Bridging ~ Bridges gap to 3mm
Water Vapour Transmission ~ 20-22 gm / sqm / 24 hrs

VOC Content ~ ​Compliant  
Picture

More Products
Site powered by Weebly. Managed by Exabytes.my - Malaysia